MK / MKT (E5) 03/2019 page 9/158
1.4 Type plate
The type plate sticks to the left side of the chamber, bottom right-hand, above the refrigerating module.
Figure 2: Type plate (example of MKT 240 regular chamber)
Indications of the type plate (example)
Manufacturer: BINDER GmbH
Alternating climate chamber
Serial no. of the chamber
Nominal temperature
180 °C
Nominal temperature
IP type of protection acc. to EN 60529
Temperature safety device acc. to standard DIN 12880
Class of temperature safety device
Optional: Special application acc. to project no.
±
10% at the indicated power frequency
Max operating pressure 29 bar
Max operating pressure in the refrigerating system
Stage 1: R 452A – 2,20 kg
Cooling 1
st
stage: Refrigerant type, filling weight
Cooling 2
nd
stage: Refrigerant type, filling weight
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol
Contains fluorinated greenhouse gases covered by the
Kyoto Protocol
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EU after 13 August 2005 and to be disposed of in
separate collection according to Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE).
Max. operating pressure 29 bar
Stage 1: R 452 A – 2,20 kg
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol
Alternating climate chamber
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
E5
Serial No. 00000000000000
Made in Germany