What to do if Bizerba Touch terminals scale is in underload?
If your Bizerba Touch terminal is in underload below the zero point, it could be that the preload is missing, or the load platter is stuck. Fit the load plate correctly. Remove any objects touching the load platter or from beneath the load plate. Set the scale to zero.
How to troubleshoot a Bizerba iS10 with no power?
Check and insert the power cable into your Bizerba Touch terminal. Press the standby/reset key.
Explains the meaning and risk levels of different warning symbols.
Specifies the device's intended application in industrial environments.
Provides notes regarding scale verification and metrological marks for EC countries.
Outlines warranty conditions and reasons for warranty lapse.
Specifies that only trained personnel should operate the device.
Details how to safely disconnect the device from the power supply.
Identifies potential hazards related to the device's system.
Warns about incorrect supply voltage and fire hazards.
Details checks required for customer-provided power supply installations.
Explains battery operation and handling precautions for lithium-ion packs.
Covers various weighing modes and functions.
Explains how to access and change scale parameters, including weighing ranges.
Details the step-by-step process for calibrating the scale.
Explains how to arrange for service or repairs for the device.
Lists common faults, their causes, and elimination steps.
General| Storage | 64 GB SSD |
|---|---|
| RAM | 4 GB |
| Operating System | Windows 10 IoT Enterprise |
| Connectivity | Ethernet |
| Ports | Ethernet |
| Operating Temperature | 0°C to 40°C |
| Interfaces | USB, Ethernet |
| Touch Technology | Projected Capacitive Touch (PCT) |
To Next Page
