[1]
Accuracy specifications are after an 1-hour warm-up with no load and
calibration at 25
°
C
Transient Response Time
Less than 50µsec for output to recover to within 15mV following a change in
output from full load to half load or vice versa.
Settling time
Less than 90msec for the output voltage to change from 1% to 99% or vice
versa following the receipt of VOLTAGE or SET command via RS-232 or
GPIB / 488 interface
OVP Accuracy, ± (% of output + offset)
< 50mV
Activation time: Average time for output to start to drop after OVP condition
occurs.
≤ 1.2 msec
To Next Page
Loading...
