EasyManua.ls Logo

Blaupunkt Bremen MP78 - Muting the Device (Mute); Telephone Audio;Navigation Audio

Blaupunkt Bremen MP78
356 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
103
ENGLISH
additional settings or completely exit
the menu.
As an alternative, you can select the set-
ting "Last Volume" in the "Volume" menu by
pressing the softkey :. When you switch
on the device, the volume level that was set
the last time you switched the device off is
activated again.
Notes:
To protect your hearing, the power-
on volume is limited to the value "25"
for the setting "Last Volume". If the
volume was higher before switch-off,
the value is automatically set to "25"
at switch-on. This prevents an unin-
tentionally and unexpectedly high vol-
ume when switching on the device.
To undo the "Last Volume" setting,
press the "On Volume" softkey ; in
the "Volume" menu. The power-on vol-
ume set last is displayed and is active
again. You can now leave the menu by
pressing the OK button B or directly
set a different power-on volume.
Muting the device ( Mute)
The device can be muted.
Briefl y press the On/Off button 3.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
briefl y press the On/Off button 3
again.
Telephone Audio/ Navigation
Audio
Adjusting the playback of telephone
calls or navigation announcements
If you connected a navigation system or
telephone as described in the installation
instructions, you can adjust the playback
of navigation announcements or telephone
calls via the radio loudspeakers in the
menu:
"TEL" setting for a connected tele-
phone: For an ongoing call, the current
audio source is muted and only your
conversation partner is played via the
radio loudspeakers.
"Navi" setting for a connected naviga-
tion system: For a navigation announce-
ment, the volume of the current audio
source is reduced and the announce-
ment is played at an increased volume.
Notes:
You can fi nd out from your Blaupunkt
dealer which navigation systems can
be used with your car sound system.
If you answer a phone call, the display
shows "Phone call".
To switch between the settings "TEL" and
"NAVI",
press the MENU button A.
Press the NEXT button 2.
Press the "Various Settings" ; soft-
key.
The "Various" menu is displayed.
Press the NEXT button 2.
Press the softkey "NAVI" 7 or "TEL"
6.
Volume
02_BREMEN_MP78_gb.indd 10302_BREMEN_MP78_gb.indd 103 04.07.2008 10:17:21 Uhr04.07.2008 10:17:21 Uhr

Table of Contents

Related product manuals