161
ENGLISH
: The AUX input is switched on.
: The AUX input is switched off.
Notes:
The "Auxiliary 1" softkey is available
only if no CD changer is connected.
You can replace the factory-set wall-
paper, which is shown on the display
for the AUX audio source, with your
own. For further details, please read
the section "Changing wallpapers of
the display" in the chapter "Adjusting
the display settings".
Naming external audio sources
(Edit Auxiliary)
You can name both AUX inputs. An external
audio source that is connected via an AUX
input will then appear on the display under
the selected name.
Note:
An external audio source must be
switched on, before it can be re-
named.
Press the MENU button A.
Press the softkey "Aux Settings" :.
The "Aux" menu is displayed.
To name the AUX-1 or AUX-2 input,
press the softkey "Edit Auxiliary 1" :
or "Edit Auxiliary 2" 7.
Note:
The "Edit Auxiliary 1" softkey is availa-
ble only if no CD changer is connected.
The 16-character text input is displayed.
The fi rst character is highlighted.
To switch between the entry positions,
press the
or button >.
•
•
•
•
쏅
쏅
쏅
쏅
To select a character at an entry position,
press the
or button @.
To save the name entered and to exit the
text input,
press the OK button B.
쏅
쏅
External audio sources
02_BREMEN_MP78_gb.indd 16102_BREMEN_MP78_gb.indd 161 04.07.2008 10:17:36 Uhr04.07.2008 10:17:36 Uhr
To Next Page
Loading...
