128
Clock – Time
Adjusting the time (Time
Setting)
Press the MENU button A.
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
Press the "Time Setting" softkey 6.
The "Time Set" menu with the currently set
time is displayed. The hours are highlight-
ed. If the time is displayed in 12-hr mode,
"AM" or "PM" appears behind the time.
To switch between hours and minutes,
press the
or button >.
To adjust hours or minutes,
press the
or button @.
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Selecting the 12/24-hour clock
mode (24 H Mode)
Press the MENU button A.
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
Press the "24 H Mode" softkey : to
activate or deactivate the 24-h mode:
: The time is displayed in 24-h
mode.
: The time is displayed in 12-h
mode.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
•
•
Clock – Time
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Displaying time permanently
with device switched off and
ignition switched on (Off Clock)
Press the MENU button A.
Press the "Clock Settings" softkey ;.
The "Clock" menu is displayed.
To display the time when the device is off
and the vehicle ignition is on,
press the "Off Clock" softkey 7:
: The time is displayed.
: The time is not displayed.
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Note:
You can replace the factory-selected
wallpaper of the time display with your
own. For further details, please read
the section "Changing wallpapers of
the display" in the chapter "Adjusting
the display settings".
쏅
쏅
쏅
쏅
•
•
쏅
02_BREMEN_MP78_gb.indd 12802_BREMEN_MP78_gb.indd 128 04.07.2008 10:17:27 Uhr04.07.2008 10:17:27 Uhr
To Next Page
Loading...
