104
The softkey with the selected setting is
brightly highlighted. If you select the "NAVI"
setting, "Navi Announcement" briefl y ap-
pears on the display.
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting the volume for telephone
audio/navigation audio (Phone Volume,
Navi Volume)
You can set the volume level at which the
telephone calls or navigation announce-
ments are mixed in.
Press the MENU button A.
Press the "Volume Settings" softkey
8.
The "Volume" menu is displayed.
Press the "Phone Volume" softkey
7 for the phone call volume or "Navi
Volume" 9 for the volume of naviga-
tion announcements.
The current setting is displayed.
Press the
or button @ or the
or
button > to adjust the volume.
Adjust the phone volume from 1 to
50.
For the volume of navigation an-
nouncements, adjust a value from
1 to 6. This value determines the
number of levels by which the naviga-
tion announcement is played louder
than the current audio source.
쏅
쏅
쏅
쏅
쏅
•
•
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Note:
You can use the volume control 5 to
adjust the volume of telephone calls
and navigation announcements whilst
you are listening to them.
Adjusting the volume of the
confi rmation beep or switching
confi rmation beep off (Beep)
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than 2 seconds,
for instance, when assigning a radio station
to a station preset button. You can adjust
the volume of the beep or switch it com-
pletely off.
Press the MENU button A.
Press the "Volume Settings" softkey
8.
The "Volume" menu is displayed.
Press the "Beep Volume" softkey 8.
Press the
or button @ or the or
button > to select the "BEEP OFF"
setting or to adjust the volume between
1 and 6:
When you have fi nished making your
changes,
press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
쏅
쏅
쏅
쏅
쏅
쏅
Volume
02_BREMEN_MP78_gb.indd 10402_BREMEN_MP78_gb.indd 104 04.07.2008 10:17:21 Uhr04.07.2008 10:17:21 Uhr
To Next Page
Loading...
