EasyManua.ls Logo

Blaupunkt Bremen MP78 - Redirecting an Ongoing Phone Call to the Cell Phone

Blaupunkt Bremen MP78
356 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
134
Ending a call
To end a call,
press the softkey with the red tele-
phone icon :.
The display shows "Call Ended".
Redirecting an ongoing phone
call to the cell phone
By default, the voice of the person calling
you is played back via the loudspeakers of
the vehicle during a phone call. You can also
redirect an ongoing phone call to your cell
phone:
Press the softkey with the green tel-
ephone icon 7.
The display changes from "Handsfree" to
"Headset". The loudspeakers in the vehi-
cle are muted and the voice of your caller is
redirected to your cell phone. Pressing the
softkey again outputs the voice again via
the loudspeakers in the vehicle.
OR:
Press the On/Off button 3 for longer
than 2 seconds.
The car sound system is switched off and
your caller is automatically redirected to
your cell phone.
Storing and calling a phone
number in the phone book of the
device
The device features its own phone book in
which you can store 10 entries. Every en-
try consists of a name and a phone number.
The numbers stored in the phone book of
the device are available independent of the
currently connected cell phone.
Note:
If you restore the device to the factory
settings, the entries of the phone book
of the device are deleted!
Storing phone numbers
To store an entry in the phone book of the
device,
open the Bluetooth menu.
Press the NEXT button 2.
Press the "Radio Phonebook" softkey
8.
Press the "Add New" softkey 6.
The display shows 20 spaces for the name
entry.
Note:
If 10 entries already exist, "RADIO PBK
MEMORY FULL" is briefl y shown on the
display. Before you can save additional
entries, you must delete existing en-
tries.
You can now enter your the name of the en-
try with up to 20 characters:
Use the
or button @ to select the
desired letter for the current position.
Change to a different position by press-
ing the
or button >.
After entering the complete name,
press the OK button B.
The display shows 20 spaces for the phone
number entry. Now you can enter the phone
number:
Use the
or button @ to select the
desired number for the current posi-
tion.
Change to a different position by press-
ing the
or button >.
Bluetooth phone call
02_BREMEN_MP78_gb.indd 13402_BREMEN_MP78_gb.indd 134 04.07.2008 10:17:28 Uhr04.07.2008 10:17:28 Uhr

Table of Contents

Related product manuals