Bluebird RT100 - Sharing a Mobile Connection; Connecting to External Devices; Connecting to a Bluetooth Device (Windows); Connecting to a Bluetooth Device (Android)

22
7 Connecting to External Devices
7.1 Connecting to a Bluetooth Device (Windows)
1
Swipe in from the right edge of the screen.
2
In the Charms menu, tap Settings.
3
At the bottom of the Settings sidebar, tap Change PC settings.
4
In the PC Settings menu, tap PC and devices.
5
In the PC and devices menu, tap Bluetooth.
6
Tap the Bluetooth toggle to enable Bluetooth.
7
Tap the device that you want to pair with.
• If the desired device does not appear in this list, then confirm that Bluetooth is enabled in the Settings
menu of that device
8
Tap Pair.
9
Follow the instructions on the screen to finish pairing the device.
After you pair a Bluetooth-enabled device, the tablet will automatically pair with that device whenever
it is within range and Bluetooth is enabled.
7.2 Connecting to a Bluetooth Devices (Android)
1
On the Home screen, tap > .
2
Make sure switch the Bluetooth to ON.
• Make sure the devices you want to pair with have Bluetooth enabled.
• You may need to start the pairing process from the headset. For details, see your headset user
guide.
3
On the Bluetooth device list, tap the device you want to pair with.
4
Type or confirm the PIN, and tap PAIR, if required.
• The passcode, which you can create, must be entered on both devices. The PIN in some devices
is fixed. For details, see the user guide of the other device.
• A PIN is only used when you connect to something for the first time.
When your device has paired with other devices via Bluetooth, your devices will automatically pair in the
future when in range.
7 Connecting to External Devices