Bluetti EP600 - Precaution of Transportation; Box Identification Protection; Storage Instruction

EP600 Energy Storage System User Manual
9
1.4 Precaution of transportation
When this product leaves the factory, it is in the best electrical and mechanical state. It's necessary to use the
original package or appropriate package of the product to ensure the safety of the Energy Storage System
during transportation. The transportation company will be responsible for the machine damage caused during
transportation. Please conduct a thorough check when picking up the products. If any packaging problems that
may cause damage to the product or any visible damage of the product have been found, please notify the
responsible transportation company immediately. If necessary, you can ask your installer or our company for
help.
1.5 Box identification protection
The identification on the box contains important information for safe operation. It is forbidden to alter or
damage it.
There’s a nameplate on the side of the box, which contains important parameter information relate to the
product. It is forbidden to alter or damage it.
The label shouldn't be covered, please clean up regularly. It should be always visible.
1.6 Storage instruction
If the EP600 energy storage system isn’t put into use immediately, the storage shall meet the following
requirements:
Please power off the Energy Storage System and charge it to 50-70% of capacity before storage;
In order to keep the battery healthy, please fully charge and discharge it every six months;
When using or storing, please make sure the ventilate are proper.
Please keep away from flammable and explosive object or gas. It is recommended to place them in a
clean and dry environment.
It’s strongly recommended to frequently clean the dust and debris outside the Energy Storage System
with dry soft cloth.
Keep away from children and pet.
Please do not place anything on the top of the Energy Storage System when using or storing.
Avoid exposing to the equipment with rain, humidity or direct sunlight.
The details of storage temperature please view“11.basic parameter”.