EP600 Energy Storage System User Manual
3.
EP600 Inverter instruction
Ep600 inverter is a three-phase PV energy storage inverter integrate PV input and grid-
connection charging and discharging. It is an important part of EP600 energy storage system.
3.1
The function and character of EP600 inverter
PV application: Dual MPPT, which can achieve PV charge and storage energy, and also can generate
power with grid-connected system .
Energy storage application: Intelligent user application mode, which can automatically control the flow of
system charging and discharging power or according the user demand to adjust the energy actively .
UPS application: Under the uninterruptible power supply (UPS) mode, the switching time of on-grid
and off-grid is less than 10ms, and off-grid output can connect the unbalanced load.
Battery expansion: Support parallel with 2-16 battery packs (B500) to expand the total capacity.
Intelligent monitor: WiFi / Bluetooth, support using app to control and monitor, and
check the system condition at anytime and anywhere.
High protection: The protection level of the system is IP65, which can be installed and
used in great majority environments.
3.2
Appearance instruction
EP600 Inverter product appearance
Figure
3-1
To Next Page
Loading...
