Bluetti EP600 - LED Indicator; Buzzer Alarm

EP600 Energy Storage System User Manual
16
3.3 LED Indicator
Table 3-4
Figure 3-2
3.4 Buzzer Alarm
When the buzzer setting is enabled：
When a new fault occurs, the buzzer sounds for 5s and stops for 1s. It will stop sounding after 10
cycles.
When a new alarm occurs, the buzzer sounds for 2s and stops for 1s. It will stop sounding after 10
cycles.
Table 3-5 Fault Information
Fault Code
Content
5.
BUS overvoltage
7.
Battery overvoltage
8.
Inverter overcurrent
10.
LLC current overcurrent input
States
Run
Green
light
Alarm
Orange
light
Fault
Red
light
No alarm and
No fault
Always
ON
/
/
Alarm without
fault
Flash
Always
ON
/
No alarm with
fault
/
/
Alway
s ON
Alarm and
fault
/
Always
ON
Alway
s ON
Run Indicator
Alarm Indicator
Fault Indicator