Bluetti EP600 - Indicator Descriptions; Product Maintenance

EP600 Energy Storage System User Manual
21
4.3Indicator
Descriptions
Table 4-5
4.4 Product Maintenance
If you find battery packs connected in parallel, and some of the battery pack indicators are off,
please contact the authorized dealer or our company immediately.
If you find the B500 battery pack is in a faulty state, please contact the authorized dealer or our
company immediately.
If you find the B500 battery pack is temporarily unable to work and is restoring, please wait
patiently. If it lasts for more than 1 hour, contact the authorized dealer or our company immediately.
The circuit breaker automatically turns“OFF”,which means the system is failure. The user are
forbidden to operate currently, must be handled by the after-sales service, must contact the dealer or
the manufacturer.
Do not disconnect the circuit breaker when the B500 battery pack is in normal service state.
Otherwise it may cause the B500 battery pack abnormal work .
Do not remove the metal shell of the B500 battery pack under any circumstances. Otherwise, it may
cause electric shock and explosion.
Light
Status
Meaning
Remark
OFF
B500 not start
The circuit breaker
can be operated now
ON
B500 is operating
The circuit breaker
can’t be operated
now
0.5Hz
Flash
B500 is shutting
down
The circuit breaker
can’t be operated
now
1Hz Flash
B500 is not
operating
If all B500 are flashing, it means that the
B500 is temporarily unavailable and is
restoring, please wait patiently. If it lasts for
more than 1 hour, contact the authorized
dealer or our company.
If a single B500 flashes, it means the
B500 is in fault status. Please contact the
authorized dealer or our company immediately.