Bluetti EP600 - End-Of-Life Management for the Inverter

EP600 Energy Storage System User Manual
68
9.2End-of-life Management for the Inverter
When the inverter reaches the end of its lifespan, it must be safely and carefully desposed of by the
provisions of local laws and regulations.
10. Troubleshooting
Table 9.1
Error Code
Error Description
Solution
1
BUS Overvoltage
Turn off the inverter and wait 30 minutes to restart
up it. If the symptom persists, please contact
BLUETTI support team.
2
3
BUS Undervoltage
4
5
Hardware BUS Overvoltage
6
7.
Hardware Battery
Overvoltage
8.
Hardware Inverter
Overcurrent
9.
10.
Hardware LLC Input
Overcurrent
11.
12.
Balanced Circuit Input
Overcurrent
Turn off the inverter and wait 30 minutes to restart
up it. If the symptom persists, please contact
BLUETTI support team.
13.
Auxiliary Power
Undervoltage
14.
DC Component Exception
15.
Relay Failure
16.
PV Connection Error
17.
PV1 Overcurrent
Turn off the inverter and wait 30 minutes to restart