User’s Manual
7
1. INTRODUCTION
1.1. WHO SHOULD USE
This manual is intended for use by anyone who is responsible for integrating, installing,
maintaining, troubleshooting, or using this equipment with any AC drive system.
Please keep this manual for future reference.
1.2. PURPOSE AND SCOPE
This manual is a user’s guide for the Model M3452 dynamic braking transistor module.
It will provide the user with the necessary information to successfully install, integrate,
and use the M3452 dynamic braking transistor Module in a variable frequency AC
drive system.
In the event of any conflict between this document and any publication and/or
documentation related to the AC drive system, the latter shall have precedence.
1.3. MANUAL VERSION AND CHANGE RECORD
Application notes and indicator information were updated in Rev 01h.
Dimensional outlines and connection drawings were updated in Rev 02.
Link Length limits were updated in Rev 02a.
A correction was made in the Node Address Switches section in Rev 02b.
The T10 Chassis was added in Rev 02c.
Figure 3-5 was updated in Rev 02d.
Manual template was updated in Rev 02e.
Figure 6-5 was updated in Rev 02f.
Update to Section 4.2.6.1.4 in Rev 02g.
Update to Section 3.4 was made in Rev 02h.
Figure 1-1: Typical M3452 – R8
To Next Page
Loading...
