Bosch AMAX 2100 - Page 37

Communication features Communication protocol
Contact ID SIA DC03 Connetix IP SIA DC09 SIA DC09
(2x ID)
Transmission via
telephone line
√ √
Transmission via IP
Ethernet
√ √ √
Transmission via IP
Wireless
√ √ √
Transmission format CID SIA CID CID/SIA CID/SIA
The following table shows an overview of the available configurations for each communication
protocol.
Configurations
Communication protocol
Contact ID SIA DC03 Connetix IP SIA DC09 SIA DC09
(2x ID)
Phone number √ √
IP address and port √ √ √
Subscriber ID* √ √ √
ID number 1* √ √
RRCFR √ √
LPREF √ √
ID number 2* √
* 4 digits for CID, 6 digits for SIA
Notice!
SIA DC09 is only implemented with UDP mode.
The following table shows an overview of the events and their message formats.
Event Description CID
format
SIA
format
ALL
Event
KP
Recall
Dialer
Event
EN
Event
SYSTEM RESET √ √
BURG ALARM 1130 BA √ √ √ √
BURG ALARM RESTORE 3130 BR √
BURG 24-HOUR 1133 BA √ √ √ √
BURG 24-HOUR RESTORE 3133 BH √
SENSOR FAULT 1380 BT √
AMAX panel Settings | en 37
Bosch Sicherheitssysteme GmbH Installation Manual 2015.05 | 06 | F.01U.309.277