Bosch AMAX 2100 - Page 51

Siren Test [code] + [4] [1] + [#] √ √ √ √
Communication Test [code] + [4] [2] + [#] √ √ √ √
Walk Test [code] + [4] [3] + [#] √ √ √ √
Change/View Date/Time [code] + [5] [1] + [#] √
Daylight Saving Time (+1h) [code] + [5] [2] + [#] √ √ √ √
Daylight Saving Time (-1h) [code] + [5] [3] + [#] √ √ √ √
Add/Change User Code [code] + [5] [4] + [#] √ √ √
Change Individual Code [code] + [5] [5] + [#] √ √ √ √ √ √ √
Change Dom. Phone No. 1 [code] + [5] [6] + [#] + [ _ _ _ _ _ _ ] + [# ]
(LED keypad )
√
Change Dom. Phone No. 2 [code] + [5] [6] + [#] [#] + [ _ _ _ _ _ _ ] +
[# ] (LED keypad )
√
Change Dom. Phone No. 3 [code] + [5] [6] + [#] [#] [#] + [ _ _ _ _ _ _ ]
+ [# ] (LED keypad )
√
Change Dom. Phone No. 4 [code] + [5] [6] + [#] [#] [#] [#] + [ _ _ _ _ _
_ ] + [# ] (LED keypad )
√
Change Dom. Phone No. 1-4 [code] + [5] [6] + [#] + [ _ ] +[#] +[ _ _ _ _ _
_ ] + [# ] (text keypad )
√
Call Back [code] + [5] [7] + [#] √ √ √ √
Change Language [code] + [5] [8] + [#] + [2-digit no. for
available languages] + [#]
01=EN; 02=DE; 03=ES; 04=FR ; 05=PT;
06=PL; 07=NL; 08=SE; 09=TR
√ √ √ √
Reset Fault/Tamper (In some
country versions only the
installer can reset a tamper
alarm)
[code] + [6] + [#] √ √ √ √
Installer Access [code] + [7] [1] + [#] (enable)
[code] + [7] [2] + [#] (disable)
√ √
System Reset [code] + [9] [9] [8] [9] + [#] √ √ √ √
Programming Mode [code] + [9] [5] [8] + [#] √
The following quick keypad operations can only be executed in the address programming
mode
Exit Programming Mode
without saving
[9] [5] [9] + [#] √
Exit Programming Mode with
saving
[9] [6] [0] + [#] √
Set Factory Default [9] [6] [1] + [#] √
AMAX panel Settings | en 51
Bosch Sicherheitssysteme GmbH Installation Manual 2015.05 | 06 | F.01U.309.277