EasyManua.ls Logo

Bosch B9512G - B92 x Keypad Operation

Bosch B9512G
185 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
116 en | Approved applications Control Panels
2018.07 | 10 | F.01U.303.996 Installation Manual Bosch Security Systems, Inc.
D1257RB/
D1257
______ 104 xQty =______ 10+ xQty =______ 225 xQty =______
D1260/D1260B ______ 140 xQty =______ 140 xQty =______ 250 xQty =______
D8125 ______ 60 xQty =______ 60 xQty =______ 60 xQty =______
D8125MUX ______ 140 xQty =______ 140 xQty =______ 140 xQty =______
D8128D ______ 25 xQty =______ 25 xQty =______ 50 xQty =______
D8129 ______ 20 xQty =______ 20 xQty =______ Refer to
footnote
1
=______
D9127T/U ______ 0.8 xQty =______ 0.8 xQty =______ 0.8 xQty =______
D9210C ______ 110 xQty =______ 100 xQty =______ 110
6
xQty =______
Ratings of other devices in the system that are not shown above:
____ ______ _____ xQty =______ ______ xQty =______ ____ xQty =______
____ ______ _____ xQty =______ ______ xQty =______ ____ xQty =______
____ ______ _____ xQty =______ ______ xQty =______ ____ xQty =______
____ ______ _____ xQty =______ ______ xQty =______ ____ xQty =______
Total A=______ Total B=______ Total C=______
1
The In Alarm calculation for the module is: 20 xQty + (16.25 x number of relays).
2
Currents listed are for the B450 only. Include plug-in device currents in calculations.
3
If using the proximity reader, add 100 mA to columns A, B, and C before calculating.
4
38 mA for each active relay.
5
Value=Minutes of alarm operation/60
6
Use 110 mA + reader. Do not exceed 260 mA.
Table19.10: Current rating chart for standby battery calculations
General ampere-hour (Ah) calculation
In this calculation, use Total B and Total C from the above table, and standby time (in hours)
and alarm time (in minutes) from the table below.
(Total B x standby time (in hours)) + (Total C x (alarm time (in minutes) / 60)) x1.15 =Total Ah
of battery
Total Ah requirements must not exceed the Ah capacity of batteries:
– One D126 Battery=7 Ah
– Two D126 Batteries=14 Ah
– One D1218 Battery=17.2 or 18 Ah
– Two D1218 Batteries=34.4 or 36 Ah
Application Standby time (in hours)
minimum
Alarm time (in minutes)
minimum
Residential Burglary 4 4
Proprietary Burglary 4 N/A
Central Station (Bank) 72 N/A
Central Station (Mercantile) 4 N/A

Table of Contents

Other manuals for Bosch B9512G

Related product manuals