D185 X
ICP-SDI-9114 X X X X X X X X X X
ICP-EZTS X X X X X X X X X X X
Door control (Access)
B901 X X X X X X X X X X X
D9210C X X X X X X X X X X X
*Approved for use on combination fire and burg systems when on a different bus from fire devices.
**Combination fire and burg systems using SDI devices might require an ICP-SDI-9114 to separate fire and
intrusion devices onto separate circuits.
1
ULC listed for Proprietary Burglary and Residential Fire only.
2
Keypad version 1.04 or higher.
3
Refer to the Dual Class B Initiating Module (D125B) Installation Instructions for compatible D125B devices.
4
Refer to the section within this section for compatible RADION devices.
5
Refer to the section within this section for compatible Inovonics devices.
7
Check for availability in your region.
Compatible detectors
The following is a sampling of wired detectors suitable for use on approved applications.
Other UL listed devices are available.
Model Name
FCC-380 Carbon Monoxide Detector
F220-P with F220-B6 Photoelectric Smoke Detector with Detector Base
HUB Potter HUB Holdup Button
ISC-BDL2-WP12 Wheelock MB Series 12V 6 " Fire Bell (Red)
MB-G6-12-R Wheelock MB Series 12V 6 " Fire Bell (Red)
ZX776Z PIR Motion Sensor [15 m (50 ft)] with POPIT
ZX794Z PIR Motion Sensor [24 m (80 ft)] with POPIT
ZX865 PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT
ZX938Z PIR Motion Sensor [18 m (60 ft)] with POPIT
ZX970 PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT
5110/4001-42 Rothenbuhler High Security Bell
B810 wireless receiver compatible accessories
Refer to RADION receiver SD (B810) Installation Guide.
To Next Page
Loading...
