Bosch BEA 350 - Test Functions

17
4.5.8 Entering lambda coefficients
HC
V
and OC
V
4.6 Identification
4.7 Test functions
You are now asked if your entry is correct.
Confirm your entry by clicking Yes or by
selecting Yes with the v z buttons and
pressing E.
The OK box is displayed for approx. 1 s.
The HC
V
and OC
V
values are stored in the
exhaust-gas analyzer.
If you have entered the values incorrectly,
click No or cancel your entry with E.
Enter the lambda coefficient values again.
The software version and checksum of the
exhaust-gas analyzer module are display-
ed. For example (see screenshot):
You can test various functions of the
exhaust-gas analyzer module in the Test
functions menu.