Bosch DIVAR AN 5000 - Page 111

Network test
Figure 7.19: Network test
Choose here to do a network test as follows:
1. Enter a Destination IP address.
2. Click <Test>.
3. Check the test result in the Test result field.
Or choose to do a Network sniffer packet export as follows:
1. Enter a Device name (click <Refresh> if the device is not shown).
2. Enter an Address (click <Browse> to search for the correct path).
3. When the correct sniffer packet is shown, click
to start the export.
DIVAR AN 3000 / DIVAR AN 5000
Operating instructions | en 111
Bosch Security Systems Operations Manual 2014.10 | 2.0 | AM18-Q0669