– Right-click the mouse to access the Quick menu
– Choose Sequence on
2. Check that a sequence of camera pictures appears,
3. To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
Monitor A
Monitor A shows live pictures of connected cameras in full-screen or multiscreen, plus status
messages and alarm events (e.g. motion and video loss warnings). When multiple events
occur, camera pictures can also be sequenced on monitor A to follow the events.
The search/play function and all user menus are also activated on this monitor.
Monitor B
Monitor B displays live pictures in full-screen (multiscreen is possible if a multiple-view
sequence is enabled on Mon B). If an alarm/detect event is signaled, the camera picture with
the event can be displayed on monitor B. When multiple events occur, camera pictures can
also be sequenced on monitor B to follow the events.
7.2.4
7.2.5
96 en | Operating instructions DIVAR AN 3000 / DIVAR AN 5000
2014.10 | 2.0 | AM18-Q0669 Operations Manual Bosch Security Systems
To Next Page
Loading...
