Bosch DIVAR AN 5000 - Reset Startup Wizard; General

Reset startup wizard
If required, select the check box here to activate the Startup wizard after the next system
restart (this is only useful if you need to reconfigure the system during the next startup).
Later, during operation, you can also reset this mode in the General screen.
Click <Next step> for the next Startup wizard screen (General settings).
General
Check the general settings on this screen:
– If they are correct, click <Next step> to go to the next Startup wizard screen (Encoder
settings).
– If changes are required, use the drop-down menus and entry fields to assign the correct
settings (if you change the system time and/or date, click <Save> before continuing).
4.4.1
4.4.2
DIVAR AN 3000 / DIVAR AN 5000 Quick install | en 23
Bosch Security Systems Operations Manual 2014.10 | 2.0 | AM18-Q0669