Default
Figure 6.27: Default
Notice!
User settings will be lost
The system menu display, language, time display mode, video format and IP address will all
lose their user defined setup after the factory defaults are restored.
To restore the unit to its factory default:
1. Select the check box for the settings you wish to return to the factory default (or choose
the checkbox Select All to return all the settings to the factory default.
2. Click <OK> to reset the chosen defaults.
6.11
68 en | Configuration DIVAR AN 3000 / DIVAR AN 5000
2014.10 | 2.0 | AM18-Q0669 Operations Manual Bosch Security Systems
To Next Page
Loading...
