Bosch DIVAR AN 5000 - Page 81

ATM/POS
Figure 6.40: Text overlay ATM/POS
Here you can enter:
– Bridge id: enter the correct channel (and select Enable)
– Bridge IP / Host IP: destination ports (you may need to input the corresponding port
number)
– Record channel set: assign the correct channels
See also
– Text data overlay, page 80
DIVAR AN 3000 / DIVAR AN 5000
Configuration | en 81
Bosch Security Systems Operations Manual 2014.10 | 2.0 | AM18-Q0669