Modular Fire Panel Product Description | en 35
Bosch Sicherheitssysteme GmbH Product Information F.01U.028.089 | 5.4 | 2009.08
Technical specifications
1.15 Functional modules
Each functional module has been developed for a specific function within the system.
All modules feature:
– robust, totally enclosed housings
– replacement during operation
– pluggable connection terminals
The plug contacts in the panel rail provide the power supply to the modules and handle all
data traffic between the module and control panel.
The module is automatically identified as soon as it is plugged in. Contact with peripherals is
achieved with compact plug/screw terminals.
If a module is replaced, the plug/screw terminals are simply re-fitted, thus eliminating the
need for time-consuming rewiring.
The activation options are defined in the FSP-5000-RPS Programming Software.
This defines what a detection point should activate in a certain state.
The functional modules have the following technical specifications in common:
Deviating technical specifications are listed for each product.
LCD display/touch screen LCD display with 320 x 240 pixels, touch screen with
127.5 mm x 170 mm (5.0 in. x 6.7 in.) active area
Operating and display elements 22 keys, 1 key switch, 11 LEDs
Connections DC1 (power supply), DC2 (redundant power supply,
CAN1, CAN2, Ethernet 100BaseTX, USB (max. 3 m
[10 ft] cable length), RS232 (max. 3 m [10 ft] cable
length), 2 signal inputs (IN1/IN2)
Permissible length of CAN cable for
system networking
L
max
= 1000 m (3280 ft), depending on configuration,
cable type and topology
Recommended cable type for CAN
connection
J-Y-ST/Y2x2x0.8
Input voltage 11 V DC to 30 V DC from FPA-5000 or FPP-5000
Max. line resistance of power supply 18 Ohm
Maximum current consumption - Standby mode: 130 mA at 24 V DC
- In the event of an alarm: 225 mA at 24 V DC
Permissible operating temperature -5 °C to 50 °C
Permissible storage temperature -20 °C to 70 °C
Housing material and color ABS plastic, (UL94 V-0), light gray, similar to RAL 7035
Dimensions (H x W x D) 280 x 340 x 87.2 mm (11.0 x 13.4 x
3.4 inches)
Weight Approx. 3000 g (6.6 lb)
Permissible operating
temperature
-5 °C to 50 °C (23 °F to 122 °F)
Permissible storage temperature -20°C to 60°C (-4°F to 140°F)
Relative humidity Max. 95% non-condensing
Housing material and color ABS plastic (UL94 V-0), satin finish, anthracite, RAL 7016
Safety standards EN 60950
Protection class IP 30
To Next Page
Loading...
