Modular Fire Panel Product Description | en 47
Bosch Sicherheitssysteme GmbH Product Information F.01U.028.089 | 5.4 | 2009.08
Technical specifications
1.15.13 RML 0008 A Relay Module for low voltage
Relay module for low voltage with eight change-over relays (type C relays) for connecting
external consumers e.g. signaling devices, smoke dampers etc.
Each relay has one NO (normally open) contact and one NC (normally closed) contact.
Labeling Connector
NC1/C1/NO1 Relay 1
NC2/C2/NO2 Relay 2
FB1 + / FB1 - Feedback relay 1
FB2 + / FB2 + Feedback relay 2
Operating and display
elements
4 LEDs (2 x red, triggered/2 x yellow, fault)
2 buttons (each on/off)
Fuses F1 = T 6.3 A, F2 = T 6.3 A
Input voltage 20 V DC to 30 V DC / 5 V DC ± 5%
Feedback current Maximum 8.5 mA per feedback output
Feedback voltage Maximum 30 V DC
Maximum current consumption
- Standby mode
- Both relays triggered
10 mA
50 mA
Maximum contact load 5 A at 120 V/230 V AC or 5 A at 30 V DC resistive
Maximum line resistance of
feedback lines
2x25Ohm
Housing material and color PPO plastic (UL94 5VA), satin finish, anthracite, RAL 7016
Dimensions (H x W x D) Approx. 127 x 96 x 60 mm (5.0 x 3.8 x 2.4 inches)
Weight Approx. 135 g (approx. 4.8 ounces)
To Next Page
Loading...
