88 en | Product Range/Order Numbers Modular Fire Panel
F.01U.028.089 | 5.4 | 2009.08 Product Information Bosch Sicherheitssysteme GmbH
4.19 Cable sets
Order number Designation
4.998.153.246 CPP 0000 A Cable Set HPD/UPS is needed to connect a UPS 2416 A
Universal Power Supply to the HPD 0000 A Power Distributor
4.998.153.235 PDC 0000 A Cable Set HPD/BCM/Battery is needed to connect a battery
pack via the HPD 0000 A Power Distributor to the BCM 0000 B Battery
Controller Module
F.01U.500.372 CPR 0001 A Printer Cable connects the RS232 interface on the MPC-xxxx-
B Panel Controller to the RS232 interface on the RLE 0000 A Junction
Board EU or RLU 0000 A Junction Board US. It is needed to connect the
THP 2020 without an IOS 0232 A module. An RLE 0000 A Junction Board
EU is required for this.
4.998.153.244 CBB 0000 A Cable Set BCM/Battery is needed to connect a second
battery pair to the battery controller module
4.998.153.242 CRP 0000 A Cable Set MPC Redundant is needed to connect the MPC-
xxxx-B Panel Controller to a second (redundant) MPC-xxxx-B Panel
Controller
4.998.153.247 CPA 0000 A Cable Set AT2000, is needed to connect the MPC-xxxx-B
Panel Controller to the AT2000 transmission device and the AT2000 to the
ENO 0000 B Fire Service Interface Module
4.998.153.243 CPB 0000 A Cable BCM/UPS is needed to connect a second UPS 2416 A
Universal Power Supply to the BCM-0000-B Battery Controller Module
To Next Page
Loading...
