Modular Fire Panel Installation/Configuration Notes | en 73
Bosch Sicherheitssysteme GmbH Product Information F.01U.028.089 | 5.4 | 2009.08
3.14 Configuration and Addressing
Addressing
The panels and remote keypads are identified in the network by a unique physical address.
This physical address is set on the rotary switches and is known as the Rotary Switch Number
(RSN) (see the figures in the circle on the circuit diagrams).
Configuration
The necessary DIP switch settings are listed for the various topologies and for a standalone
panel (without and with redundant panel).
Addressing and configuration of MPC-xxxx-B Panel Controller
1.
2.
3.
4.
To Next Page
Loading...
