A
D
H
If in doubt, look it up
107
Display messages
Messages on the display
(only TH) Y
ou have assigned an exchange line for a telephone in your part
-
ner group.
Y
ou can now complete a connection for this partner or the partner can dial
an external number himself.
Language: Select this line to choose a language for the display texts. This
message only appears at the very beginning, when you put your telephone
into operation. Later on you can change the language via a menu.
All calls are diverted to another telephone.
All additional calls are diverted to another telephone if you are already con
-
nected to a party
.
Call diversion: Y
ou can decide whether you wish to be connected to the
destination of the call diversion or cancel the call.
– Divert: Press the ”Enter” key,
– Cancel call: Replace the handset.
The door device is active. T
o deactivate it, select this line or press the cor
-
responding function key
.
This message appears in the idle display if a headset is connected and
active. T
o deactivate the headset, open the corresponding menu and select
the line.
Assigning
line for PAxx
D/GB/F
Div.
Div. busy
→
Divert?
Door device
Headset present
To Next Page
Loading...
