O
If in doubt, look it up
123
Menu
items on the display
"
Enter the appointment information.
One-time reminder: Date and time.
Daily reminder: T
ime at 00:00.
You
can specify the number of redial attempts (max. 9) that your phone is to
make if the called party is busy
. This function must be enabled by your
BOSCH TELECOM service representative.
Assignment: Call number is entered as a note during a call. Notes can be
listed separately in the telephone book. Y
ou can also dial any call number
contained in the note.
All entries stored as notes are shown on the display
.
Operating
mode: Procedures in which the target address is transmitted from
the
DTE or stored in the telephone book are supported by the DTE for call
control.
Asynchronous:
Facilitates call control by the terminal. The target address can be trans
-
mitted manually, from the data terminal or from the telephone book of your
phone. The maximum baud rate is 38.4 kbit/s.
Synchronous:
T
o replace dedicated line connections by switched ISDN connections and
to connect synchronous DTEs. The target address can be transmitted
manually or from the telephone book of your telephone.
The maximum baud rate is 64 kbit/s.
No
appointment
No. redial tries
-
Note
Notes
Oper. mode
To Next Page
Loading...
