S
If in doubt, look it up
126
Menu
items on the display
"
Deactivate second call in the main menu (only possible in idle mode) if you
do not want to be disturbed by additional calls. Y
ou can activate the no
knocking function during a call.
Y
ou can activate or deactivate the transmission of VIP functions.
T
erminal adapter: Define the transmission parameters that correspond to
the respective data terminal. Y
ou may only change the parameters if there
is no ongoing data connection.
Select this menu item to assign frequently used functions to the softkeys.
These functions will no longer appear on the display
.
If you are not satisfied with the transmission quality during handsfree mode,
you can adjust the setting of this function to suit the particular ambient
conditions in the room
〈→
p. 135).
Y
ou can delete and reactivate the display of a partner
.
Adjust the volume of the signal tone.
Y
ou can assign a partner to another partner or destination key
.
Starts the speech path test. Y
ou can test the receiver and the monitoring
function by blowing into the receiver
. The symbol for “Handset of
f-hook”
appears on the display when the handset is lifted.
The symbol for “Monitoring on” appears on the display when the monitoring
function is turned on.
Second
call
Send VIP functions
Set TA
-
Set function keys
Set handsfree universal/enhanced/internal/special
Set partner display
Signal tone
Spec partner pos.
Speech path
To Next Page
Loading...
