26 en | Installation MAP 5000
2019-09 | 25 | F.01U.168.332 Installation manual Bosch Security Systems B.V.
Accessory mounting plate overview
Element Description
1 Locations for ICP-MAP0017 12 V converters (two maximum)
2 Location for fuse plate (SIV) (one maximum)
3 Screw locations for AT 2000 communicator (one maximum)
4 Screw location for AT 2000 earth ground
2.8 Installing the 12 V converter
1. Mount the ICP-MAP0017 12 V converter onto the accessory mounting plate as shown in
the figure below (screws not supplied).
2. Connect the field wiring to the terminal block of the 12 V converter as shown in the figure
below and leave the other ends unconnected.
To Next Page
Loading...
