Bosch MAP 5000 Series - 3.3 Connecting the Main Panel

MAP 5000 Connections | en 45
Bosch Security Systems B.V. Installation manual 2019-09 | 25 | F.01U.168.332
Data bus connection of the control center on the external BDB
3.3 Connecting the main panel
This chapter describes the connection of the following main panels:
– MAP Main Panel (ICP-MAP5000-2)
– MAP Main Panel with IP Communicator (ICP-MAP5000-COM) including the MAP GSM
module (ITS-MAP0008).
– MAP Main Panel Small (ICP-MAP5000-S)
– MAP Main Panel Small with IP Communicator (ICP-MAP5000-SC) including the MAP GSM
module (ITS-MAP0008).
Connection strip of the main panel
Connection Description
1 External BDB connector
2 Two programmable voltage outputs (28 V DC / 1 A)
3 Two programmable dry relay outputs (toggle switches)
4 Voltage output AUX (28 V DC / 1 A)
5 Eight supervised inputs
6 Input for panel tamper switch