Need help?Do you have a question about the Bosch OBD 1350 and is the answer not in the manual?
General| Supported Protocols | CAN |
|---|---|
| Power Source | Vehicle battery |
| Device Type | OBD II / EOBD Scanner |
| Languages | English, Spanish, French |
| Functions | Read and clear diagnostic trouble codes, view live data, perform system tests |
Process for identifying the vehicle using VIN or manual selection.
Accessing vehicle-specific repair information from a database.
View snapshot of emission system operations and monitor status.
Function to retrieve Diagnostic Trouble Codes (DTCs) from vehicle modules.
Deletes DTCs and resets I/M Monitor data from vehicle control modules.
Allows real-time viewing of vehicle parameter identification (PID) data.
Records PIDs for diagnosing intermittent driveability problems.
Monitors battery, starter, and alternator performance via DLC voltage.
Functional test of Ford modules with ignition key ON, engine OFF.
Tests injector circuits and solenoids for Ford diesel engines (KOEO).
Tests output devices controlled by Ford PCM by powering them on/off.
Tests Ford control module inputs, outputs, and sensor ranges (KOER).
Tests glow plug relay and detects differences in current between glow plug banks.
Tests if cylinders contribute equally to engine performance (KOER).
Troubleshooting steps if the scan tool fails to power up or function.
To Next Page