Bosch OBD 1350 - Keypad Test

580001 | REV. A | 11.2016
OBD 1350 ProGrade OBDII Scan Tool
|
User guide | 15
|
en
System Setup
English/Metric
Auto-Power Off
Quick Test
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
2. Start Display Test.
• Press .
3. Look for missing spots.
• The first screen displayed says, “Check for
missing spots in the display.”
Display Test
Press BACK to exit
Check for spots in the
display
• Solid red, green, and blue screens are displayed.
• These four screens will continue in succession
until is pressed.
4. Press to exit the test and return to the System
Setup menu.
Keypad Test
The Keypad Test is used to verify that the keys are work-
ing correctly.
From System Setup screen:
1. Select Keypad Test.
• Use the UP and DOWN keys until Keypad
Test is highlighted.
• Press .