Bosch Rexroth CS 440RC - Page 10

10/57
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
Using the navigation button move the cursor in front of “SENSOR AND VALVES” and
press the Enter button. The screen to the left will appear.
Each of these sections can be configured from this screen, refer to the Table of
Contents for the proper page number and instruction for each section.
To return to the first screen, press the Escape button.
Using the navigation button move the cursor in front of “MATERIAL SETUP” and
press the Enter button. The screen to the left will appear.
Each of these sections can be configured from this screen, refer to the Table of
Contents for the proper page number and instruction for each section.
To return to the first screen, press the Escape button.