45/57
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
14 High Speed Alarm Set-up
14.1 Setting the High Speed Alarm
Insert the programming key, select “SYSTEM SETUP”, select “OPERATION
SETTINGS” and select “ALARM SPEED”. The screen to the left will appear.
• Use the Down navigation button to move the cursor to “88 KMH (MPH)” and
press the Enter button.
• Using the Left or Right navigation button, move to number to be changed.
• Using the Up or Down navigation button, change the number as required.
• Once all the numbers have been changed, press the Enter button.
• Press the Escape button twice to return to the first screen.
To Next Page
Loading...
