14/57
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
3.6 Setting the Date and Time
Insert the programming key, select “SYSTEMS”, select “OPERATION SETTINGS”,
and select “DATE & TIME”. The screen to the left will appear.
To edit the Second, Minute, Hour, Date, Month or Year use the Navigational arrow,
move the Cursor in front of the item to be edited and press the Enter button.
Using the Left or Right navigation button, move the cursor under the number to be
changed.
Using the Up or Down navigation button, change the number as required.
Once all the numbers have been changed, press the Enter button.
Once all the items have been corrected, press the Escape button three (3) times to
return to the first screen.
3.7 Enabling GPS Mode
Insert the programming key, select “SYSTEMS SETUP”, select “CONTROL MODE”
and then select either 0 for OFF and 1 for ON.
To Next Page
Loading...
