19/57
Bosch Rexroth Canada ı 03.10.2011 ı Revision 5.4
4.1.
4.1.4.1.
4.1.7
7 7
7
Simulated Ground Speed
Simulated Ground SpeedSimulated Ground Speed
Simulated Ground Speed
Simulated ground speed activation in operation mode (without a key):
Make sure that the vehicle is stationary (ground speed = 0) and display is on main
OPERATION SCREEN, as shown to the left.
Hold Enter button down, press Escape button, and let go both buttons at the same
time.
Press Escape to switch to OPERATOR SCREEN, as shown to the left.
Press Up and Down buttons to adjust simulated ground speed, as shown to the left.
The speed will increase and decrease in 5 mile or kilometer per hour increments.
To Next Page
Loading...
