24/64 HYDROTRAC GFT >130 kNm | Transport and storage
Bosch Rexroth AG, Issue 10.2019, RE 79094
f Apply a layer of grease onto the output seal area, before you apply the external
preservation. Use a lithium multi-purpose grease L-XBCHA3 (GB 7324-94) or
FAG Arcanol MULTI3 or Klüberplex BE 31-222. Thus preventing, that preservative
reaches to the output seal. For the output seal, refer to the spare parts drawing,
view ”B“ in appendix D “Technical data / Drawings” of the material number-
specic operating instructions.
f Use a brush to apply the preservative evenly onto the bright spots.
6.2.2 Maximum storage periods
The following storage conditions must be met to ensure a maximum storage period
of 12 months:
• Temperature -30 … 60°C, relative air humidity of max. 70%
• Dry and dust-free
• Protected against rain, snow and sunlight
CORRECTION COPY 1 |17.10.2019 | ONLY FOR INTERNAL USE
To Next Page
Loading...
Need help?
General