Name at the
housing
Connection type Connection type
(at the device)
Mating connector or cable
(from outside)
XETH1, XETH2 Ethernet interfaces
10/100/1000 Base-T
RJ45 socket, 8-pin RJ45 plug
(Twisted pair, 8-wire)
XUSB1 to XUSB6 USB interfaces USB socket, 4-pin,
type A
USB plug, 4-pin
Internal connections
USB 3.0 interface USB socket, 4-pin,
type A
USB plug, 4-pin
mSATA interface mSATA base
mPCIe interface mPCIe base
2 slots or 4 slots (see chapter
9.9.1 "Available slots per PC
box type" on page 19)
PCI/PCIe PCI/PCIe card
Connections on the PFC extension cards
XF40/XF41 RT Ethernet interfaces RJ45 socket, 8-pin RJ45 plug (twisted pair,
8-wire)
XF08 Profibus DP interface D-Sub socket, 9-pin D-Sub plug, 9-pin
XF01/XF02 Sercos III interfaces RJ45 socket, 8-pin RJ45 plug (twisted pair,
8-wire)
9.2 PC voltage supply X10
The 24 V DC voltage supply for the control cabinet PC is connected via the "X10"
connection.
All voltages internally required are generated without any electrical isolation via
a DC/DC converter. The connection is designed as spring terminal, SPC 5/3-
ST-7,62, 3-pin, grid 7.62 mm. Connect cables to it with the conductor cross-
sections listed in tab. 9-1 "Conductor cross-sections permitted for the spring
terminal at X10" on page 15.
Fig. 9-1: 24 V DC connection, X10, pin assignment
Bosch Rexroth AG
Interfaces
IndraControl VPB 40.4
14/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P
To Next Page
Loading...
