Bosch Rexroth IndraMotion MLC User Manual

Standard Title
IEC 60721-3-2 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters and their
severities
Section 2: Transportation
IEC 60721-3-3 Classification of environmental conditions
Part 3: Classification of groups of environmental parameters and their
severities
Section 3: Stationary use at weather-protected locations
Tab. 8-1: Standards used
8.1 CE marking
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2014/30/EC
The electronic products described in the present operating instructions are
intended for use in industrial environments and comply with the following
requirements:
Standard Title
IEC 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards – Immunity for industrial
environments
IEC 61000-6-4 Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for
industrial environments
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.2 UL/CSA certified
The devices are certified acc. to
Bosch Rexroth AG
Standards
IndraControl VPB 40.4
12/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P

Bosch Rexroth IndraMotion MLC Specifications

General

Programming environment	IndraWorks Engineering
Programming standards	IEC 61131-3, PLCopen
Category	Industrial Automation
Type	Motion Logic Controller (MLC)
Programming Languages	IEC 61131-3
Communication Interfaces	Ethernet/IP, PROFINET, PROFIBUS
Operating System	Real-time operating system (RTOS)
Motion Control Features	interpolation, electronic cams, gearing
Safety	Integrated safety functions
Application areas	packaging, robotics
Integration capability	Seamless integration with Bosch Rexroth
Hardware platform	Modular design with various I/O and communication modules