EasyManua.ls Logo

Bosch Rexroth IndraMotion MLC - 5.7.3 Solid State Drive; 5.7.4 Fans; 6 Ambient conditions

Bosch Rexroth IndraMotion MLC
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.7.3 Solid State Drive
The SSD (Solid State Drive) shock resistance and temperature resistance is
higher than of an ordinary hard disk. The hard disk is only subject to electrical
and not to mechanical wear.
The SSD wears faster in case of
defragmentation
NOTICE
Defragmentation is not necessary, as an SSD is an electronic storage medium.
5.7.4 Fans
Fans are mechanical wear components. Their service life is extremely
temperature-dependent. The service life of the fan integrated into the housing,
is as follows:
Ambient temperature Service life
40 °C 60,000 hours
70 °C 30,000 hours
6 Ambient conditions
In operation Transport Storage
Max. Ambient
temperature
+5 °C to +45 °C -20 °C to +60 °C -20 °C to +60 °C
Max.
Temperature
gradient
Temporal temperature
changes up to 3 K per
minute
Temporal temperature
changes up to 3 K per
minute
Temporal temperature
changes up to 3 K per
minute
Humidity Min. rel. humidity 5 %
Max. rel. humidity 85 %
Min. absolute humidity
1 g/m
3
Max. absolute humidity
25 g/m
3
Condensation not allowed
Corresponds to climatic
class 3K3 acc. to EN
60721-3-3
Min. rel. humidity 5 %
Max. rel. humidity 85 %
Min. absolute humidity
1 g/m
3
Max. absolute humidity
25 g/m
3
Condensation not allowed
Corresponds to climatic
class 2K2 acc. to EN
60721-3-2
Min. rel. humidity 5 %
Max. rel. humidity 85 %
Min. absolute humidity
1 g/m
3
Max. absolute humidity
25 g/m
3
Condensation not allowed
Corresponds to climatic
class 1K2 acc. to EN
60721-3-1
Air pressure Up to 3,000 m above sea
level acc. to EN 61131-2
Up to 3,000 m above sea
level acc. to EN 61131-2
Up to 3,000 m above sea
level acc. to EN 61131-2
Bosch Rexroth AG
Ambient conditions
IndraControl VPB 40.4
8/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P

Table of Contents

Related product manuals