Fig. 12-4: "Network configuration" dialog
The network settings are only applied after a control restart.
12.8.3 Firmware management
The menu items are only available in this dialog if the initial firmware
is active.
The firmware management provides a backup and restore functionality of the
internal read-only memory of the control. This allows to move the partitions
SYSTEM, OEM and USER to an archive that can subsequently also be restored
via the dialog.
Basically, MLC firmware archives can also be loaded via the
"Firmware management" dialog. In this use case, give priority to the
IndraWorks firmware dialog (if available).
The "Firmware management" site provides the following information:
IndraControl VPB 40.4
Bosch Rexroth AG
Device description
DOK-MLC***-INDRACTRLV4-IT02-EN-P
51/87
To Next Page
Loading...
