Fig. 12-7: "Archive SYSTEM/OEM/USER:" dialog – Archive file was created successfully
Restore SYSTEM/OEM/USER
If the action "Restore SYSTEM/OEM/USER" is selected, a modal dialog opens to
select a previously generated archive file. The source file can either be selected
from the local file system or the USER partition of the control. If the file is
selected from the local file system, the archive is installed in two steps:
● Transferring the file to the control
● Installing the archive file (e.g. firmware archive file)
Bosch Rexroth AG
Device description
IndraControl VPB 40.4
54/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P
To Next Page
Loading...
