Example:
Boot stop was enabled.
Fig. 12-14:
Diagnostics and settings – Boot stop enabled
Next function: Call the next function.
Activate function: Enable the selected function. The function normally runs
within some seconds. Thus, wait for feedback of the system with regard to the
respectively selected function.
For a description of the individual functions, refer to the chapter "Menu
"BOOTSTOP"" in the documentation "IndraLogic XLC IndraMotion MLC 14VRS
Functional Description" (see chapter 1.4 "Related documents" on page 2) or to
the IndraWorks online help.
The "About" dialog displays general application information. It is called via the
context menu of the application.
IndraControl VPB 40.4
Bosch Rexroth AG
Device description
DOK-MLC***-INDRACTRLV4-IT02-EN-P
61/87
To Next Page
Loading...
