Fig. 12-21: MLC commissioning wizard: Step 5
Complete the dialog with Finish.
Now, the final steps to create the device IndraMotion MLC VPx in the
IndraWorks project are automatically executed.
9. Project planning
After the MLC device has been created in the project tree, the device is
available for parameterization and programming. For further details, please
refer to the available IndraMotion MLC manuals (refer to tab. 1-2 "Related
documents" on page 2).
Bosch Rexroth AG
Device description
IndraControl VPB 40.4
68/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P
To Next Page
Loading...
