Fig. 12-23: Starting the IndraWorks firmware management
2. Selecting system firmware
Select the system firmware for your device. To select the firmware from the
IndraWorks installation, go to "Firmware of installation". Alternatively, a
firmware from any memory location on your PC can selected via "Firmware
of file".
The name of a system firmware file valid for the target IndraMotion
MLC VPx (basis IndraControl VPB 40.4) always starts with IPC02s-
MLC-... .
Bosch Rexroth AG
Device description
IndraControl VPB 40.4
70/87
DOK-MLC***-INDRACTRLV4-IT02-EN-P
To Next Page
Loading...
