Wraptor A6200 User Manual 14
Setup
Installing the Windows Driver (Optional)
2. Tap Settings.
3. Tap Connection.
4. Tap Advanced Network Settings, and then tap Ethernet.
5. Tap IP Settings.
• If your network uses DHCP to automatically assign IP addresses, tap
DHCP
.
• If your network requires manually providing IP addresses, tap
Static
. Tap the back button
to return to the
Network
screen. Get assistance from your network administrator to fill in the IP
address and other settings on the
Network
screen.
6. Tap the home button to return to the home screen.
Installing the Windows Driver (Optional)
If you are using Brady Workstation software, you do not need to install the windows driver.
You must install the Windows driver if you are using any of the following.
• Older Brady software such as LabelMark.
• Third-party software.
• The Data Automation app in Brady Workstation.
See the Driver Installation Guide PDF file on the USB drive that came with the printer.
To Next Page
Loading...
